|
Post by solomon320 on Sept 2, 2019 18:27:32 GMT -5
Good Evening, Has anyone repaired the anti swivel pin in a rod holder? I think for certain one of mine is trashed and I'm not going to pull the holder out until next week when I go back to work. If anyone has repaired or has an idea I am all ears. I will have a better idea when I get it taken out.
Thanks for your time Chris
|
|
|
Post by finatic on Sept 2, 2019 18:39:31 GMT -5
Dan buddy i just posted the same question almost simultaneously to you. I've got one I think two with the same situation.
|
|
|
Post by abouttime2fish on Sept 2, 2019 19:15:05 GMT -5
Hammer and punch to remove pieces of old pin. Replace with appropriate size stainless steel bolt.
|
|
|
Post by abouttime2fish on Sept 2, 2019 19:27:40 GMT -5
Adding pics to finatic’s post
|
|
|
Post by solomon320 on Sept 12, 2019 21:16:07 GMT -5
repaired, Thanks for the help! sol...
|
|
|
Post by bgreene18 on May 21, 2020 6:56:31 GMT -5
Literally had the same problem are the majority of mine. Replaced with bolts, but the threads are beating the hell out of my rods. Went to local hardware store yesterday in search of a better alternative. I’ll be replacing all of them with a 3/16” stainless clevis pin. Super easy swap out without removing the bolts already there.
|
|