|
Post by boostin350 on Oct 1, 2019 21:14:10 GMT -5
Does anyone know where I can get a gasket for the leaning post live well lid. When under way I have water coming out of the live well. I would like to get a new gasket or something to prevent the water from coming out any ideas?
|
|
|
Post by reelkul on Oct 2, 2019 7:52:12 GMT -5
I adjust the flow of the water into the livewell via the supply nozzle. This way the water never goes past the top overflow drain. If I have the nozzle opened all the way, water enters the livewell faster than it flows out, thus the water starts coming out of the lid.
|
|
|
Post by fishnfool on Oct 2, 2019 8:20:37 GMT -5
Grainger
|
|
|
Post by Dirty D on Oct 3, 2019 17:11:18 GMT -5
Attachment DeletedAttachment DeletedI made my own gasket out of that one sided sticky weather strip you can get at any Home Depot or Hardware store. I think I used either 3/8 or 1/2 inch wide and it was 1/4 or 3/8 thick. Just apply it to the lid in the same position where the old gasket was. Works great and a lot less $$ than getting the original replacement gasket. Looks to be the 1/2 inch wide weather strip and 1/4 inch thick. This is the transom well but this will work on the leaning post lid as well.
|
|