|
Post by EasyPeasy on Jul 28, 2020 11:58:23 GMT -5
Hi Folks - I'm a new owner of a 2012 2660 CC. Very happy to have found this group. I'm graduating from a Sea Ray 240 Sundancer and glad to have a higher performance boat suitable for some blue water runs (but not *too* far). I'm at the north end of the Jersey Shore, and while I don't plan any runs to the canyons, I do look forward to going up and down the coast and various wrecks for fishing.
Grateful for any suggestions - I do have a question to ask - I'm looking to get some manufacturer parts - one being the table and the table mounting bracket that goes up by the bow. Is that even possible? I haven't seen any kind of factory supply parts anywhere.
I will also be doing some serious detailing - would enjoy some discussions on that. The hull and topsides (especially the blue hull) are terribly oxidized, and I will be doing some serious compounding and waxing in the fall, and probably again in the spring to get it in tip top shape for next year. I've bought a Makita rotary polisher in anticipation of that, and have access to a Porter Cable Dual Action Polisher for the waxing work....
Thanks, looking forward to some good times, here and on the water.
Stu
|
|
|
Post by fishnfool on Jul 28, 2020 12:18:18 GMT -5
Hey Stu glad you found the owners forum and congratulations on the purchase of your 2660. I have the same boat. A very capable platform and with her range certainly capable of making canyon runs on the right days.
Call your local SF dealer for parts, alternatively contact Sailfish direct. I've bought things like emblematic direct from SF.
|
|
|
Post by hookedup on Jul 28, 2020 12:55:41 GMT -5
Welcome aboard. I've ordered from the dealer and Seminole Marine as well.
|
|
|
Post by finatic on Jul 28, 2020 15:08:33 GMT -5
Welcome, best of luck with your new sled.
|
|
footy3
Captain
Posts: 558
Member is Online
|
Post by footy3 on Jul 29, 2020 6:43:25 GMT -5
Welcome aboard and good luck with the new boat! I am also in NJ, in Seaside Park, mostly fish out of Barnegat Inlet. Good luck and happy to help with any questions I can.
|
|
|
Post by outtadblue on Jul 29, 2020 8:38:43 GMT -5
Welcome aboard!
|
|
|
Post by EasyPeasy on Jul 29, 2020 15:19:00 GMT -5
Welcome aboard and good luck with the new boat! I am also in NJ, in Seaside Park, mostly fish out of Barnegat Inlet. Good luck and happy to help with any questions I can. footy3 - We have a place in SSP as well. In fact I just sank a mooring buoy there a few weeks ago. Will be down in August. Part of the reason I picked this boat (and hull) is so I can go down to Barnegat from Red Bank without needing calm winds and flat seas. Will look for you, and I could use some advice on Barnegat Inlet as well. I've only been in and out of Manasquan Inlet.
|
|