|
Post by johnd on Sept 10, 2020 9:19:37 GMT -5
I own a 2007 2660CC and cannot find the standpipe that plugs the outflow and allows for water to circulate. Does anyone know where I can find a replacement and the diameter of the opening?
Thanks John
|
|
|
Post by fishnfool on Sept 10, 2020 10:12:30 GMT -5
At least on mine there is no standpipe plug, there is a valve in the bilge below the livewell that allows you open/ drain and close/fill. The overflow is built into the livewell.
|
|
|
Post by barryturano on Sept 10, 2020 10:54:52 GMT -5
I think that I need to make a standpipe for the live well behind the helm seat. It will fill up but the overflow is very high so when you are running it gets very wet especially for whom ever is sitting on the stbd side.
|
|
|
Post by johnd on Sept 11, 2020 14:47:23 GMT -5
I did manage to get a measurement of the outflow tube. It looks like 1.25". I ordered one from a company called Essenbay Marine. It fits a 1.25" opening and is just under 12' high. it looks like the one I can't find. I will get it around Sept 21. When it shows up I will post to let you know if it fits. The Sailfish part number for current models is the same as as the 2007 2660, except current models use a straight pipe to go in a .75" opening in the bottom (floor) of the live well, not the side.
|
|
|
Post by barryturano on Sept 12, 2020 9:59:15 GMT -5
Thanks for the info. Looking forward to seeing what you get. Thank you for the research.
|
|