|
Post by ridenreel on Sept 23, 2020 18:37:26 GMT -5
I recently bought a 2008 sailfish 2360 twin yams 150hp,stock props beat up pretty good1 blade on each has obvious bend,PO liked the oyster bars..as is WOT 5100rpm 42 mph 1/4 tank about 800lbs of people,thinking of replacing who has what? Thanks
|
|
|
Post by finatic on Sept 23, 2020 19:54:58 GMT -5
You should see 6000 rpms at w.o.t when trimmed up. I run 3 blade power teck props. Years ago with perfect conditions I got 54 mph at 6100 rpms. 1/4 fuel two guys.
|
|
|
Post by hookedup on Sept 24, 2020 6:44:04 GMT -5
You could always tell Ken at PropGods what you're looking for (economy, hole shot, WOT, etc.) and he'll tell you what he thinks is best. Might even let you try out his props. He gave me very good info.
|
|
|
Post by jski59 on Sept 24, 2020 7:08:54 GMT -5
I had a 2360 with twin 150s and liked Powertech PTZ 4 blades the best, they had good stern lift...can't remember the pitch but I think they were 17s. But definitely contact Ken at propgods, he's the man.
|
|