|
Post by solomon320 on Nov 21, 2020 16:31:45 GMT -5
Good Evening, My console has canvass on three sides plus wings. My main bitch is when (and it's every time) I go out the front gets wet and then for the next 7 hrs I cant see squat. So what do you guys have as far as plastic see through material that you can treat to get the salt water to bead and stay relatively clear? I know the material is not plastic I just used the word for lack of the correct one. In my case I don't think I can use rainex, that stuff doesn't agree with errr plastic . Maybe I need to get a new panel made out of stuff that will work better than what I have. Thoughts? sol...
|
|
|
Post by Dirty D on Nov 22, 2020 8:00:04 GMT -5
I use Plexus.
|
|
|
Post by finatic on Nov 22, 2020 8:30:49 GMT -5
I just put wax on the outside only it helps a lot.
|
|
|
Post by solomon320 on Nov 22, 2020 9:49:27 GMT -5
I just put wax on the outside only it helps a lot. That doesn't blurr it worse than it is? and what kind of wax would you recomend?
Thanks getting back you guys! sol...
|
|
|
Post by fishnfool on Nov 22, 2020 15:57:43 GMT -5
|
|
|
Post by finatic on Nov 22, 2020 20:22:30 GMT -5
I just put wax on the outside only it helps a lot. That doesn't blurr it worse than it is? and what kind of wax would you recomend?
Thanks getting back you guys! sol...
Novus products work really well and keep them soft
|
|
|
Post by Gitsum on Nov 28, 2020 20:54:41 GMT -5
Only one thing to do.... EZ2CY! Expensive yes but It’s the best!
|
|
|
Post by andrew886 on Nov 29, 2020 21:31:57 GMT -5
I have Strataglass for my main windshield as well and its noticeably clearer than the other panels. I’ve tried a number of products to keep it beading and clear, but the only thing that works worth mentioning is a $5 plastic squeegee.
Sent from my iPhone using Tapatalk
|
|
|
Post by lainiej on Nov 30, 2020 9:57:42 GMT -5
Most guys wont agree with what I do but here goes. I have a half moon zipper on the front panel with a grommet hole at the bottom. When I get allot of spray I unzip the half moon only half way on both sides and connect the grommet to a swivel snap at the top of the canvas. Now you can see through the factory windshield without seeing through the wet isinglass. You will get some spray through but not much and you can still see. It is much easier to see through the windshield when it's wet versus the isinglass. If anyone is interested I can take a picture tomorrow and post it.
|
|
|
Post by lainiej on Nov 30, 2020 10:25:53 GMT -5
Found a picture
|
|