|
Post by finatic on Nov 22, 2020 19:06:26 GMT -5
These came with our boats, there are also no longer available. The volume on mine will not go high or low it's stuck in a low volume. Does anybody still have one,,, that has upgraded and is willing to sell.
|
|
|
Post by finatic on Nov 23, 2020 8:27:24 GMT -5
This may be a stretch trying to locate one. Next choice is radio that fits existing opening is that also a stretch.
|
|
|
Post by abouttime2fish on Nov 23, 2020 8:46:34 GMT -5
I think there are adapters to fill the hole and install a different brand. For some reason I’m thinking Fusion makes them for their units.
|
|
|
Post by Dirty D on Nov 23, 2020 9:08:37 GMT -5
I have a Fusion in mine so maybe a fusion would fit the hole in yours.
|
|
gilm
Seaman
Posts: 166
|
Post by gilm on Nov 23, 2020 9:22:00 GMT -5
Did you try ebay?
Sent from my iPhone using Tapatalk
|
|
|
Post by barryturano on Nov 23, 2020 16:24:04 GMT -5
A piece of starboard to cover the hole then cut a new hole in the starboard for a new radio.
|
|
|
Post by abouttime2fish on Nov 23, 2020 18:18:30 GMT -5
|
|
|
Post by schlnrnd on Nov 24, 2020 6:59:52 GMT -5
I have a Fusion in mine so maybe a fusion would fit the hole in yours. I have a Fusion and not sure if it’s where your Clarion was but it’s a great unit and fit right in. Attachments:
|
|
|
Post by outtadblue on Nov 24, 2020 10:08:20 GMT -5
Glen I replaced my Clarion with a Fusion. It was almost the same size. I just had to trim the hole a little bigger. I think I still have my old Clarion if you can use parts from it to fix yours. I can’t remember what went wrong with it.
|
|
|
Post by finatic on Nov 24, 2020 18:31:37 GMT -5
Thanks I'll let you know. It's strange the cut out is an oval and it's not that small. And my biggest issue is the amount of wiring for a frigging radio.
|
|
|
Post by usmcsvt98 on Nov 29, 2020 20:16:48 GMT -5
Hey, I have a CDM4 that is as close to brand new as you will find. I will be pulling it out of the boat in the next week or two. It works & looks like new. It’s yours if you want it!
|
|
|
Post by usmcsvt98 on Nov 29, 2020 20:18:11 GMT -5
Also the direct replacement if wanting to get something the exact same size, is the Clarion M608. This will require no modifications. It is what I will be putting in.
|
|