|
Post by finatic on Dec 13, 2020 16:11:54 GMT -5
My old white hatch covers leaked bad over the season so I got new ones different style and in black just to change things up a little. Put the new ones in today WTF they leak.... So back to the original hatch covers does anyone know where to purchase them. They are the 8 inch splash well hatch covers.
|
|
|
Post by fishnfool on Dec 13, 2020 17:01:51 GMT -5
Well crap!
Are you going to try a different brand?
|
|
|
Post by barryturano on Dec 13, 2020 17:08:41 GMT -5
If you have the originals, replace the O rings. If the cover itself is leaking or take them off amd put a new bead of sealer under them. But I am sure that you probably re-bed them already when you installed the new ones. Or keep the new ones and replace the O rings.
|
|
|
Post by finatic on Dec 13, 2020 18:46:07 GMT -5
I think I found them on Amazon I did re bed the old ones and the new ones still had leaking.the old ones are actually concaved their shot. A simple project turned into a pain in the balls. Their made by Seaflo they should work... Maybe lol
|
|
|
Post by reelkul on Dec 14, 2020 12:25:54 GMT -5
I re-beded mine a few months ago, and I ended up making custom o-rings from Silicone cord stock, that I cut to length and glued together using silicone adhesive for making flange seals. I bought the cord stock at McMaster Carr and the adhesive at Amazon.
|
|
|
Post by abouttime2fish on Dec 14, 2020 19:56:49 GMT -5
Beckson marine makes the plates. www.beckson.com/dckplt.htmlI think west marine carries them too. I found the o-rings at a local marina, of course after I had ordered online.
|
|