|
Post by cavalierfish on Jun 29, 2021 15:30:26 GMT -5
Hi, the front two bolts on my helm chair have come out completely. I now have a rocking chair. Does anyone know how these bolts connect into the helm station? There is no way to see the underside where I believe the nuts would hold the chair to the helm leaning post. Do you have to pull out the tackle drawers or fridge behind it to see the underside and hold the bolt? If so, that reach is longer than my arm from back to front. I also don’t completely understand how the bolts attach into the chair. Both bolts landed on the deck. Are there diagrams or schematics on how the helm chairs are attached? T
|
|
|
Post by finatic on Jun 29, 2021 18:54:31 GMT -5
That's crazy, I took mine out years ago. Mine had been set with 5200 and about 12 course screws. The 5200 bonded so good it ripped the non slip deck when I removed. So worse case if you can get the 5200 under it it's there for good.
|
|
|
Post by cavalierfish on Jun 30, 2021 14:33:56 GMT -5
Finatic. Not sure I expressed myself correctly. The chair sits on what I am calling a leaning post. It does not sit on the deck.
|
|
|
Post by finatic on Jun 30, 2021 18:38:41 GMT -5
Got ya.
|
|