|
Post by finfever21 on Aug 29, 2022 20:49:05 GMT -5
Looking for bow cushions for our 2360 cc if anyone has some they aren't using. Thanks
|
|
|
Post by fishnfool on Aug 30, 2022 8:35:30 GMT -5
Have you priced them out with Llbroc? Based on my recent experience their prices have def gone up from a few years ago but might be worth getting a quote for new.
Shipping might be the biggest challenge buying used, will be super expensive.
|
|
|
Post by EasyPeasy on Aug 30, 2022 9:01:15 GMT -5
I just bought replacement covers from Llebroc for a subset. Been meaning to share with the group. The attached set of covers was a little over $500 and I'll have them installed on my old backs and foam (which still look and feel as good as new) 4BSF1106-STD.pdf (141.75 KB).
|
|
|
Post by fishnfool on Aug 30, 2022 10:12:52 GMT -5
I just bought replacement covers from Llebroc for a subset. Been meaning to share with the group. The attached set of covers was a little over $500 and I'll have them installed on my old backs and foam (which still look and feel as good as new) View Attachment. You finally got that done, nice! Who are you going to get to do the work and did you get an estimate for the labor and materials do it?
|
|
|
Post by EasyPeasy on Aug 30, 2022 18:14:33 GMT -5
I just bought replacement covers from Llebroc for a subset. Been meaning to share with the group. The attached set of covers was a little over $500 and I'll have them installed on my old backs and foam (which still look and feel as good as new) View Attachment. You finally got that done, nice! Who are you going to get to do the work and did you get an estimate for the labor and materials do it? Haha - well they haven't arrived, but my order was invoiced to my card yesterday, so I presume they are finally on the way. It became a long story, in part because my "2012" 2660, was in fact built in July 2011 and uses the previous generation specs. There were many that said "these should fit" but when I compared them to my measured dimensions, they didn't match close enough for comfort. And you may be familiar, you *really* have to keep on them to keep things moving. Anyway, once they arrive, I plan to keep the old backing board and foam. Those are all in fine condition. The issue was the vinyl and especially the stitching was dry and rotting. The whole boat was poorly maintained (from a polish and cleaning point of view) by previous owner and I'm dealing with that on many fronts. Engines have been rock solid. So a local upholstery shop that comes recommended for boat cushions will be used. He should have no materials, and the previous quote to do all coaming pads was somewhere around $450 or 500 including the vinyl (but it wouldn't match). I think I'll get away for around $300. I think all he has to do is wrap them around and staple the backs. I guess Llebroc could have built the whole replacements for me, but the old materials seem fine, and as you mentioned, the shipping would be horrendous. I have a few reference drawings from LLebroc that I'd like to put in some archive here for anyone's use. Can you suggest where they would go? Stu
|
|
|
Post by fishnfool on Aug 30, 2022 18:45:56 GMT -5
Owners resource section would seem appropriate for that. Good luck and keep and us posted.
|
|
|
Post by footy3 on Sept 1, 2022 6:56:52 GMT -5
Stu - Just curious, what shop are you using?
|
|
|
Post by Jack on Sept 6, 2022 18:05:36 GMT -5
Hi Finfever21, I run a 2015 Sailfish CC 236 and have a set of cushions that came with the boat. I do not and have not used them since as my wife doesn't boat and I use 236 for fishing only. They are excellent shape as previous owner was fisherman also. I ran an ad in May and was going to rerun in the spring You can see pic there plus I have more to send. My Cell is 817 939 9342 AD May 7, 2022 "I am a fisherman and "thought" I would need these cushions that came with (new to me) 2006 CC. No signs of wear or scuff marks. They are in good to excellent conditions and kept under cover in my basement. Have more pix if interested."
Shoalmate
|
|
|
Post by shoalmate on Sept 7, 2022 7:12:30 GMT -5
|
|
|
Post by EasyPeasy on Sept 7, 2022 8:39:35 GMT -5
Stu - Just curious, what shop are you using? Hi Mike (correct?), Just using a local upholstery shop up here in Middletown. They've done some boat cushion for friends up here, but of course couldn't do the logo and such. So he's happy to put the new covers on the old materials. I'm banking that the foam is good (none of these are actually seats). I had Gioia Sails do cushions for my previous boat (Sea Ray 240), and they do great work, but pricey - that needed the whole seats remanufactured as the originals were plywood and rotted. If I have any doubts about this local guy, I'll go down and see them. I thought about bringing my boat down to SSP for a week or two, but with the price of gas I decided it wasn't worth it. I've started going off shore this year, bought some heavy tackle, and going looking for yellowfin. I'd rather burn my gas and money on that. Only been once, with no luck, but it's been an odd year I've heard.
|
|
|
Post by footy3 on Sept 7, 2022 9:31:02 GMT -5
Yeah, it's Mike. I used Convery Canvas in Tom's river for curtains on my Mako CC and they did a nice job at a reasonable price. I didn't realize you kept your boat up north, thought you kept it in Seaside Park.
|
|
|
Post by EasyPeasy on Sept 7, 2022 9:35:49 GMT -5
Navesink River, and Raritan Bay. Up here is where we live. We just try to spend time in SSP. I have a mooring buoy in SSP just off the beach north of the boat launch if ever you need it....
|
|
|
Post by finfever21 on Sept 15, 2022 14:26:32 GMT -5
Have you priced them out with Llbroc? Based on my recent experience their prices have def gone up from a few years ago but might be worth getting a quote for new. Shipping might be the biggest challenge buying used, will be super expensive. Llebroc no longer makes them for my year and model. I just got the email back.
|
|
|
Post by fishnfool on Sept 15, 2022 15:14:48 GMT -5
Have you priced them out with Llbroc? Based on my recent experience their prices have def gone up from a few years ago but might be worth getting a quote for new. Shipping might be the biggest challenge buying used, will be super expensive. Llebroc no longer makes them for my year and model. I just got the email back. What model/yr do you have?
|
|
|
Post by finfever21 on Sept 15, 2022 15:36:01 GMT -5
2006 2360
|
|