|
Post by jski59 on Oct 8, 2018 6:30:10 GMT -5
Is that a led replacement accessory light to fit in the factory fluorescent housing? Taco makes a replacement led light to fit in the tubing...however, I didn’t think it was very bright and the switch in the one I bought barely lasted one season. Next time I’ll just try to make something using the old light guts and an led strip.
|
|
|
Post by kbh on Oct 8, 2018 7:19:53 GMT -5
Is that a led replacement accessory light to fit in the factory fluorescent housing? Yes!, it's strips of LED's mounted on the cardboard backing that came with the original neon bulb. Lights up white, blue or red. Also mounted a small switch on the end to control the color. Did that on both front and back lights. The red is nice for running at night.
|
|
|
Post by kbh on Oct 8, 2018 7:23:21 GMT -5
Here's a picture of the red and white. I believe the previous picture is with the blue and the white on.
|
|
|
Post by tiger on Oct 8, 2018 23:00:59 GMT -5
. Attachments:
|
|
|
Post by mikey111k on Oct 9, 2018 7:18:05 GMT -5
|
|
|
Post by Ol Mucky on Oct 9, 2018 10:24:42 GMT -5
What is that next to your trim tab Ladder mount??
|
|
|
Post by andrew886 on Oct 9, 2018 21:55:19 GMT -5
Here's a picture of the red and white. I believe the previous picture is with the blue and the white on. Nice! Im sure a lot nicer than factory. May have to add that to the wish list for offseason!
|
|
|
Post by mikey111k on Oct 10, 2018 9:09:30 GMT -5
OlMucky - Yuep. Its the ladder mount and ladder.
|
|
|
Post by Ol Mucky on Oct 10, 2018 11:39:21 GMT -5
Did you have it made? Looks interesting. (Could just be the angle of the pic)
|
|
|
Post by cadmonkey236 on Oct 10, 2018 23:35:37 GMT -5
Docked @ Cape Anne Marina in Gloucester after the repower.
Newburyport Boat Basin
|
|
|
Post by ragtop409 on Oct 11, 2018 6:10:15 GMT -5
What power did it have before? 2 stroke? 225hp? Good looking ride. Rag’s
|
|
|
Post by cadmonkey236 on Oct 11, 2018 8:16:44 GMT -5
What power did it have before? 2 stroke? 225hp? Good looking ride. Rag’s
Thanks.
I had a F225 four stoke on it before the repower. Had a catastrophic failure of one cylinder which forced my hand. Love the engine so far but the Zuke is very difficult to prop correctly....still trying to get it dialed in. I have a power tech prop on there now but might go back to the Zuke prop next year.
|
|
|
Post by fishnfool on Oct 11, 2018 8:48:55 GMT -5
My brother in's Zukes like the Rev 4 with a little cup labbed in.
|
|
|
Post by wkendwarrior on Oct 11, 2018 11:14:30 GMT -5
These are older pics of my 04 266. My newer pictures are too large or detailed? Another picture of the US / Canadian border in the background. We had some snow squalls that night. Attachments:
|
|
Pepe
Seaman
Posts: 126
|
Post by Pepe on Oct 11, 2018 15:28:11 GMT -5
Here are my Pictures
|
|