|
Post by fishnfool on Feb 19, 2019 14:21:43 GMT -5
|
|
|
Post by ragtop409 on Feb 19, 2019 22:13:52 GMT -5
That is the boat for me!! Look at all that space behind the LP and the floor lockers. Maybe olMuckys buddy will take mine off my hands. Where is it located at? Rag’s
|
|
|
Post by fishnfool on Feb 19, 2019 22:46:41 GMT -5
That is the boat for me!! Look at all that space behind the LP and the floor lockers. Maybe olMuckys buddy will take mine off my hands. Where is it located at? Rag’s Eastern shore of MD, about 40 minutes from Annapolis. Have no idea why SF did away with those floor lockers on the 2660?!
|
|
|
Post by schlnrnd on Feb 20, 2019 21:35:34 GMT -5
Gotta hang twin 200s on the transom.
|
|
|
Post by fishnfool on Feb 21, 2019 10:05:23 GMT -5
Meh, only a marginal improvement with F200's vs f150's. Love my f150s
|
|
|
Post by finatic on Feb 21, 2019 20:23:46 GMT -5
Meh, only a marginal improvement with F200's vs f150's. Love my f150s X2 the 200's are not worth the extra $$$$ .. Go big or go home hang a pair of 250's.
|
|
|
Post by ragtop409 on Feb 21, 2019 22:24:28 GMT -5
Meh, only a marginal improvement with F200's vs f150's. Love my f150s X2 the 200's are not worth the extra $$$$ .. Go big or go home hang a pair of 250's. At that point why stop at 250’s 4.2L are 50ish pounds less then 3.3L so you might as well find a nice used set of 300’s 😬😬 Rag’s
|
|
|
Post by jpinkerton on Feb 22, 2019 19:42:08 GMT -5
At that point why stop at 250’s 4.2L are 50ish pounds less then 3.3L so you might as well find a nice used set of 300’s 😬😬 Rag’s Great way to reduce the draft from 24" to about 6" with the entire hull being out of the water at 85mph!!
|
|