|
Post by schlnrnd on Oct 13, 2020 18:37:05 GMT -5
So the second detailer came in at $30/foot for wet sanding and detailing topside including all compartments. I know of two local boat companies that use her regularly. She also confirmed its to the point that it needs to be wet sanded. Considering the time and effort I think this is a fair price.
|
|
|
Post by EasyPeasy on Oct 13, 2020 18:58:54 GMT -5
So the second detailer came in at $30/foot for wet sanding and detailing topside including all compartments. I know of two local boat companies that use her regularly. She also confirmed its to the point that it needs to be wet sanded. Considering the time and effort I think this is a fair price. Well that's a lot better than $2000! I'd give it a shot....
|
|
|
Post by abouttime2fish on Oct 13, 2020 19:33:36 GMT -5
Sounds reasonable to me. I’ve had my boat just compounded and waxed, and it’s usually $20-24/ft.
|
|
|
Post by Ol Mucky on Oct 14, 2020 9:02:17 GMT -5
do you just use a spur between the cutting compound and the polish, or do you need to wash it? If you use the spur regularly you won’t have to wash it on a job ...generally. Read the post about the person recommending wet-sanding. As I mentioned, attempt least aggressive approach first. But, like it was recommended to them in the above post, wet-sanding will be required on their particular hull. Compounding can only pull so much oxidation out. If you don’t get it all and down to a fully ‘clean’ surface, all your hours compounding will have been a wasted effort. I think it’s why the cost for a knowledgeable, quality detailer is worth it.
|
|
|
Post by schlnrnd on Oct 18, 2020 8:35:52 GMT -5
Went to a local fiberglass repair shop that deals with gelcoat repair and restoration on Saturday to look at another product Aqua 1000 & 2000. It was recommended to be as good as wet sanding. After looking at the pictures he advised going with the wet sand. So, detailer is putting me on the schedule and should be completed in November. After that, I'll maintain with quarterly waxing. I appreciate everyone's input.
|
|
|
Post by fishnfool on Oct 18, 2020 9:11:25 GMT -5
Good luck, post up some pics when done!
|
|
|
Post by abouttime2fish on Oct 18, 2020 16:22:06 GMT -5
You should ask whomever is doing it what an annual contract is to do that waxing for you. I’ve been very tempted to go that route.
|
|
|
Post by EasyPeasy on Oct 19, 2020 8:35:13 GMT -5
I wasn't sure about cleaning the pads. Do you just use a spur between the cutting compound and the polish, or do you need to wash it? This novice uses a pad until it's gummed up and then I switch pads and use a fresh one. By the time the second one is through, I can spur the first and it's dry enough that is clears up nicely. I never wash them, I am leary of washing wool, but I will defer to the more experienced gentleman to whom your question was directed. Edit: Ooops, now I see that I missed Ol Mucky's response. Glad to hear that we're pretty much on the same page....
|
|
|
Post by schlnrnd on Jan 2, 2021 20:26:18 GMT -5
|
|
|
Post by schlnrnd on Jan 2, 2021 20:28:51 GMT -5
Next project is to sand the bottom paint off and restore the Gelcoat.
|
|
|
Post by EasyPeasy on Jan 3, 2021 12:05:48 GMT -5
So is that *just* wet sanding? Or did they already polish / wax afterward? (...cuz it looks awesome!)
I fished late in the season so of course my compound / restoring project is now slated for March/April.....
|
|
|
Post by Twisted on Jan 4, 2021 10:18:05 GMT -5
That looks amazing!!
|
|
|
Post by schlnrnd on Jan 4, 2021 21:56:59 GMT -5
So is that *just* wet sanding? Or did they already polish / wax afterward? (...cuz it looks awesome!) I fished late in the season so of course my compound / restoring project is now slated for March/April..... Finished product.
|
|