|
|
Post by DH120 on Apr 10, 2021 21:59:49 GMT -5
I have a 2006 CC 2360 and was wondering if anybody can help with where I can get a T top mesh storage replacement. The other zipper finally froze up so I need a replacement. Not impressed with the replacements I have seen online so far. Maybe local marine upholstery shop can make one?
|
|
|
|
Post by outtadblue on Apr 11, 2021 7:29:01 GMT -5
I would think you could get one made locally. I have a buddy that liked mine and had a local shop make him one to match his boat.
|
|
|
|
Post by popeye on Apr 11, 2021 9:33:19 GMT -5
Several posts on this. I need a new one too. I recal a converasation, either here, the old site, or on THT where teh OEM for these was in Jacksonville and made them for Sailfish. Aparently they still have the old templates. I wish I would have saved that thread.
|
|
|
|
Post by abouttime2fish on Apr 11, 2021 18:11:45 GMT -5
My canvas guy made one. Replaced original while I was replacing ttop canvas.
|
|
|
|
Post by jupiter2360 on Apr 14, 2021 9:01:05 GMT -5
I am going to replace mine soon. I believe I was quoted $75 for G2 Outfitters to replicate mine. You send in your piece and they replicate it exactly.
when I had a new Weblon Ttop fabric made by them. They did an excellent job on weblon on schedule. They also have a good reputation on the hull truth.
|
|
|
|
Post by Maysport on Apr 14, 2021 11:05:41 GMT -5
I am going to replace mine soon. I believe I was quoted $75 for G2 Outfitters to replicate mine. You send in your piece and they replicate it exactly. when I had a new Weblon Ttop fabric made by them. They did an excellent job on weblon on schedule. They also have a good reputation on the hull truth. How have your grommets been holding up from G2? I like the info and pricing they have, but was concerned about them using plated brass grommets. |
|
|
|
Post by DH120 on Apr 15, 2021 20:37:43 GMT -5
Sending mine to G2 Outfitters tomorrow. $90 with a two week turn around. Friend had his done last year and is happy with it.
|
|
|
|
Post by DH120 on May 6, 2021 19:05:10 GMT -5
Sending mine to G2 Outfitters tomorrow. $90 with a two week turn around. Friend had his done last year and is happy with it. Received the new mesh T top storage from G2 Outfitters. Perfect fit. Exactly like the original. $20 to ship it to them, $90 to make includes return shipping. Never bought the bag type, but I like this better. Attachments:
|
|
|
|
Post by barryturano on May 7, 2021 18:52:52 GMT -5
On this same subject, does anyone have a diagram of how to and the amount of para cord needed to reattach the mesh to the frame. I stopped down a my boat earlier and found that the cord started to dry rot and break. I am thinking that its time for new paracord or 26 zip ties. Any help is greatly appreciated.
|
|
|
|
Post by Maysport on May 9, 2021 20:21:25 GMT -5
I don't think paracord is the best string for a t-top. I think it has a core with wrapping around it? Polyester lacing that is UV resistant would be best.
There are a bunch of YouTube videos on how to run the lacing. I used this one: Basically cut off old cord, clean aluminum if you want, attach zip ties to temporarily hold fabric in place using a zip tie every 4th hole or so, then start lacing the way they show you in the video.
In it they state to estimate cord length, add the length and width of the top, double it, and add 10'. The life jacket Phifertex storage was tied on 3 sides on my boat, so I added the 3 side dimensions, added 10' and had plenty.
|
|
