|
Post by captainb on Aug 1, 2021 18:07:08 GMT -5
I found a post where someone ( I think Mikey) installed rod holders for deep dropping with a backing plate in the gunnel board . I was thinking of trying this with a 15 degree swivel rod holder but not so sure if the gunnel boards are strong enough.the midship original sailfish rod holder started backing out on this past trip deep dropping with a tanacom 1000 with 6lbs of lead . I’m trying to find the easiest solution for a rod holder on each side of the boat.
I doubt I’ll ever get a huge reel for sword fishing .Any ideas appreciated!! The good news got a pretty big golden tile almost at the cost of rod and rod holder. oh yeah ,boats a 2660.
|
|
|
Post by outtadblue on Aug 8, 2021 9:12:32 GMT -5
I placed mine just in front of the most forward rod holder. I used the inspection plate for the fuel fill to get to the underside for the backing plate. Attachments:
|
|
|
Post by finatic on Aug 8, 2021 18:28:32 GMT -5
Dam Richard that boat is shining big time.
|
|
|
Post by outtadblue on Aug 11, 2021 8:46:42 GMT -5
Dam Richard that boat is shining big time. This taking right after a good wax job. It’s not that clean now.
|
|