|
Post by Flatsman77 on Aug 13, 2021 7:47:46 GMT -5
Hey everyone. Been awhile. I’m running twin 150’s on my 07’ 2660 and noticed recently my fuel consumption is way up. Bottom is clean. They have 1000 hrs on them. Haven’t done plugs in a while. Any other Maitenance I should be considering to improve performance? Also at wot I’m only getting 5k rpms and 31knts half loaded with the 3 blade (no sure pitch) props. I know that is a separate issue but any input greatly appreciated.
Thanks!
Flats
|
|
|
Post by fishnfool on Aug 13, 2021 8:25:03 GMT -5
That WOT range is well below what I'm seeing when I trim out. I have 19p 3 blades.
Plugs can help fuel eco, injector cleaning can also help.
|
|
|
Post by gatorman on Aug 13, 2021 18:12:27 GMT -5
I agree with Fishnfool to clean the injectors and change out the plugs. What holes are your motors mounted on? In my 2660 I could get 5400-5600 at 45mph top end with 60-70 gallons in it.
|
|