|
Post by hookedup on Sept 24, 2021 7:45:31 GMT -5
The table base kept coming off of the plastic clips under the table when stored. The base was sliding down and resting against the autopilot pump or worse, the autopilot hoses. It appears over time the clips had loosened due to the weight of the base.
I took the clips off and added velcro straps under the clips. I turned the clips around so the side that isn't warped is now holding the table and is strapped by the velcro. We don't use the table very often, so I think this should last for several years.
|
|
|
Post by Rawbee on Nov 1, 2021 18:22:53 GMT -5
Great idea. I have a 325DC and I find the tables do come loose from the plastic mounts during some rougher seas.
|
|