Phil
Seaman
Posts: 3
|
Post by Phil on Nov 30, 2021 22:56:56 GMT -5
Need to replace the all around nav light. Appears the wiring comes out directly above the white/blue dome lights. How do I remove the LED dome light so I can get at the wiring for the nav light. Boat is a 2015 275DC. I can rotate the plastic bezel about 1/4 turn but does not come off in either position. I tried prying, but stopped before something snapped. Any suggestions? Thanks Attachments:
|
|
|
Post by fishnfool on Dec 1, 2021 7:52:29 GMT -5
Can you not pull the wire up through the top far enough? There was enough slack in mine that I could pull it through the hole and splice the new light in all from the top.
|
|
Phil
Seaman
Posts: 3
|
Post by Phil on Dec 1, 2021 13:39:18 GMT -5
I can can pull some wire up. However hole is sized just for the wire. I'm not sure if I cut it I can get splice and shrink wrap back through. Definetly won't fit a butt splice through.
Seems cleaner if I could remove light
|
|
|
Post by hookedup on Dec 1, 2021 14:39:04 GMT -5
I've taken those off a couple of times and I agree that each time I think it's going to break. You can see the notches in the light, but I if I remember correctly I still had to use a very small screwdriver to pry it off. You could also call Sailfish customer support to see if they can help.
|
|
Phil
Seaman
Posts: 3
|
Post by Phil on Dec 2, 2021 21:05:34 GMT -5
Thanks. Exact part I was looking for
|
|
|
Post by wesley8808 on Jun 23, 2023 10:09:43 GMT -5
So I have a question. One of my lights went out (well, the white works but the blue isn't coming on) and when on itc's website, it seems the lights are all red, blue and white. Is that true? I can only get white and blue with my toggle switch.
Also, has anyone purchased from them for a replacement? They do not offer it in their store.
|
|
|
Post by hookedup on Jun 23, 2023 12:00:14 GMT -5
Mine are only blue and white. Since there are only 3 wires on the lamps, I suspect they can only be 2 colors.
I tried finding the light and it appears ITC-US has changed part numbers, but I couldn't find a good match. I suggest you call Aaron at Sailfish and see if he can help. My blue stopped working on one of the lights and when I disassembled it and reinstalled it, it started working again. My guess was a bad connection.
|
|
|
Post by wesley8808 on Jun 23, 2023 22:02:51 GMT -5
Mine are only blue and white. Since there are only 3 wires on the lamps, I suspect they can only be 2 colors.
I tried finding the light and it appears ITC-US has changed part numbers, but I couldn't find a good match. I suggest you call Aaron at Sailfish and see if he can help. My blue stopped working on one of the lights and when I disassembled it and reinstalled it, it started working again. My guess was a bad connection.
I will have to pull it and hope for just a bad connection as well! Thank you for the info!
|
|