|
Post by pxl357 on Apr 10, 2022 17:50:57 GMT -5
Hey guys ! I put a message on THT about it but i figure i can post here as well. My outrigger mounts are totally frozen ( won’r turn ). I put tell out of the boat , which btw was a nightmare and now i’m not quite sure if i can salvage them. They don’t budge and all the diagram i Found show 4 bolt under the mounting plate which i dont have. Here a quick picture pasteboard.co/wuKfZJmZcDI4.jpgThey did not look horrible so it would have been nice to save them. Anybody rebuild then or know how to find the diagram for this model ? Moreover if i buy the new 280 is the mounting the same ? Thanks !
|
|
|
Post by schlnrnd on Apr 10, 2022 18:48:28 GMT -5
I think Taco rebuilds then and would be your best place to start.
|
|
|
Post by hookedup on Apr 10, 2022 18:53:02 GMT -5
On my previous boat I didn't put a mounting plate as it wasn't necessary. I did on the Sailfish as I wasn't sure if it was going to be needed. I think all Taco mounts are the same. Mine are 380s and they look just like the 280s as far as mounting. My first step would be leaving them for a day or two in some penetrating fluid. I might even start with soaking in salt-free in case that's what's locking it up. Good luck and maybe someone has a better idea of how to resolve. They're not cheap, so I'd try to unlock them if possible.
|
|
|
Post by pxl357 on Apr 10, 2022 19:06:00 GMT -5
Thanks ! I reached out to taco customer service for a price on rebuild , it would be amazing !
|
|
|
Post by jski59 on Apr 11, 2022 5:32:39 GMT -5
|
|