|
Post by boostin350 on Mar 13, 2023 19:33:09 GMT -5
I have a 2006 Sailfish 2660cc, can anyone give me the size pump that came factory on the boats wash down. Pictures would be fantastic!
Thanks everyone.
|
|
|
Post by hookedup on Mar 14, 2023 6:33:03 GMT -5
Hope you get your answer. The day after I got the boat I took pictures of every thing I could find with a part number. Hoping never to need those pics, but after all, it's a boat so I suspect I'll need them one day.
Good luck.
|
|
|
Post by fishnfool on Mar 14, 2023 7:40:48 GMT -5
I replaced my raw water washdown a few years ago with the replacement Shurflo Blaster pump don't recall the exact model but it was the newer version of the pump.
|
|
|
Post by reelkul on Mar 14, 2023 9:21:24 GMT -5
I replaced mine in 2013 and this is what I have been using since then. Not sure if the original was the same model. BTW my boat is also a 2006 2660CC.
|
|
|
Post by suprasteve on Mar 26, 2023 16:30:11 GMT -5
2 weeks late to reply but...I replaced mine a few weeks ago. I couldn't find an exact match for the Shurflo model # that was in my 2007 (I assume it was the original one). I ended up bringing it to West Marine (overpaying, I know) and opening boxes until I found one that looked about the same as far as dimensions. The screw holes weren't exactly the same template (slightly closer together), but it fit the existing tubing without any modifications needed there. I guess what I'm sharing is you may not be able to find an exact replacement in new stock.
|
|
|
Post by EasyPeasy on Mar 28, 2023 8:01:03 GMT -5
Yup - Shurflo pump fit mine - the screw footprint matched as well. Sorry I can't recall the modoel/specs....
|
|