|
Post by r1mkal on Mar 17, 2023 19:06:24 GMT -5
Finally got the minn kota installed on my 218WAC. there was a lot of planning with how to install and which parts to buy. the installer wound up putting a shelf inside the cabin storage to mount a single lithium 36v battery along the charger, fuse box and off/on switch As for the minn kota we wound up putting it on the side with a rail gate that uses a hinge to open and close. The project was a bit costy but I am super happy with the installation - Here is how she looks today:
|
|
|
Post by fishnfool on Mar 17, 2023 19:35:10 GMT -5
Awesome, looks clean! Would love to see it action.
|
|
jerryk
Captain
When not online I'm likely on Knot Online
Posts: 599
|
Post by jerryk on Mar 17, 2023 21:02:32 GMT -5
I like it other than the bungee cord at the aft end...never liked those but I think you could fashion a strap that doesn't stretch and age and get a secure tie-down that way if needed. I just hate to see how that bungee does on a wavy day!
|
|
|
Post by hookedup on Mar 18, 2023 10:49:02 GMT -5
Looks good. Let us know how it works for you.
|
|
|
Post by r1mkal on Mar 20, 2023 15:55:24 GMT -5
I like it other than the bungee cord at the aft end...never liked those but I think you could fashion a strap that doesn't stretch and age and get a secure tie-down that way if needed. I just hate to see how that bungee does on a wavy day! The bungee cord thing was temporary. My installer said there are no flex in the plate installed to the bow. I could potentially not use one at all. I took it out for the first time to calibrate and tested the spot lock, it worked flawlessly in my channel. The real test will be in April when tog season starts.
|
|
jerryk
Captain
When not online I'm likely on Knot Online
Posts: 599
|
Post by jerryk on Mar 20, 2023 17:30:27 GMT -5
Awesome! We all expect a tog report soon!
|
|
|
Post by earlbyaa on Mar 28, 2024 9:29:23 GMT -5
Two quick questions. 1. Where did you get the mounting plate? Was is a local one-off or is it something one could order? 2. What is the shaft length on the motor?
I am thinking of adding one to my 218 WAC as well.
thanks Earl
|
|