hans
Seaman
Posts: 61
|
Post by hans on Apr 19, 2023 12:04:15 GMT -5
Hi, Does anyone has the schematic wiring layout for the cable connector plug coming from the boat. (Need it so I can trace the cables from the switch panel back to the boat wire plug. My boat is 2008 Express 23. Replaced my original toggle switch panel with the replacement one from Sailfish. Two of the switches dont work. (Sailfish is sending me replacement ones), but not sure if that will remediate this issue. Might be a mismatch on some of the wires from plug to switch.
|
|
|
Post by fishnfool on Apr 19, 2023 16:03:19 GMT -5
I seem to recall the new switch panel wasn't exactly plug and play with old membrane style.
A few members on here have swapped them out hopefully they will chime in.
Paging finatic!
|
|
|
Post by abouttime2fish on Apr 19, 2023 18:09:33 GMT -5
Check out wiring diagrams under owner resources.
When I did mine I had to swap several wires on the back of the panel. Used the trial and error method. Wash down switch turns on baitwell… swap those two. Continue. The nav/anchor switch was the tough one. There was wire swapping, diode reversing…. Eventually I got it right.
|
|