|
Post by finatic on Jun 17, 2023 7:03:12 GMT -5
Every once in a while my steering gets very difficult to turn. Just happens,, then it's gone. What I did notice when this happens the following day I'll find some fluid that dripped out,, or pressure pushes it out of the fill cap. Not a lot but enough to show a Drip line below the cap. Any thoughts I'm stumped on this one.
|
|
|
Post by fishnfool on Jun 17, 2023 8:41:57 GMT -5
Sounds like the hydro steering might be getting some air in the system maybe? Definily want to get any leaks fixed before you get your AP intalled. You tech should do a power purge when he does the install so that may help.
|
|
|
Post by finatic on Jun 17, 2023 8:47:14 GMT -5
That's my concern the AP. Thanks.
|
|
|
Post by abouttime2fish on Jun 17, 2023 20:34:49 GMT -5
I ran into similar. Put a bunch of grease into the lower unit area where the motor turns. Pushed water out when I did. Turned much easier after that. No
|
|
|
Post by fishnfool on Jun 17, 2023 20:49:55 GMT -5
I ran into similar. Put a bunch of grease into the lower unit area where the motor turns. Pushed water out when I did. Turned much easier after that. No Good point, grease the zero fittings! I just hit mine this year.
|
|