sean
Seaman
Posts: 1
|
Post by sean on Aug 30, 2023 23:18:30 GMT -5
Hi All,
I have a 2009 2660 WAC. My boat has severe ventilation in rough seas. I have read lots of suggestions including wedges, rev4's, 4 blade props, 6" set off plates and raising/lowering the motors. Which of these fixes worked? Any other ideas? Thanks in advance.
|
|
|
Post by fishnfool on Aug 31, 2023 8:52:23 GMT -5
Buy those 15p 4 blade Solas props for sale in the classified section assuming you have F150s which I think those props are hubbed for. That's a great deal.
|
|
|
Post by finatic on Aug 31, 2023 15:48:23 GMT -5
Buy those 15p 4 blade Solas props for sale in the classified section assuming you have F150s which I think those props are hubbed for. That's a great deal. I was going to buy them BUT it's only one prop.
|
|
|
Post by Fritz on Aug 31, 2023 17:08:39 GMT -5
We lowered the motors on our old 2006 2660 WAC (lowest hole). The only ventilation problems we ever had were sometimes when we would HST for wahoo. I now have the 4 blade Solas w/Rubex hubs on my 270 cc now and we love them. I would go 4 blade 1st,( worth every penny IMO) then maybe drop them after that if your still having a problem Check Amazon, that is where we found the best price at the time, back in April. . Good luck
|
|