|
Post by albemarle305 on Dec 26, 2023 20:24:37 GMT -5
insert code here Just installed a 96" rhodan on my 2008 2360 cc . Opted to go with a 12x16 offset bracket that was custom modified, to avoid the relocation of nav light, and not interfere with anchor box. Located a rhodan plug in anchor box. Ran wire over anchor box lip, down bilge in to center floor box, where we then ran wire on top edge of that box completely out of way, at that point I went straight into the console. Everything went pretty easy really. Went with a single 36v 110 amp which fit perfectly on floor of console where I removed the toilet. The bracket is 1/2" thick, the top plate of hull was 3/4-1" thick. There is also a 1/2" backing plate matching up to top plate. Here are some pics. I'll post more if needed West ga machine & Fabrication Advanced marine products did the bracket, Jerry is a great guy
|
|
|
Post by abouttime2fish on Dec 27, 2023 12:11:16 GMT -5
Scroll all the way down and switch to desktop version. Then you should be able to add pics.
|
|
|
Post by finatic on Dec 27, 2023 18:44:02 GMT -5
Very nice.
|
|
jerryk
Captain
When not online I'm likely on Knot Online
Posts: 597
|
Post by jerryk on Dec 27, 2023 19:14:40 GMT -5
Looks like a solid install, well done Captain!
|
|
|
Post by albemarle305 on Dec 28, 2023 14:51:52 GMT -5
|
|
|
Post by abouttime2fish on Jan 6, 2024 18:16:52 GMT -5
Seems at first everyone was using 84ā, now the switch to 96ā. Any reviews one over the other on a 2360? What bow height did you use?
|
|
|
Post by albemarle305 on Jan 9, 2024 21:10:52 GMT -5
I havent used mine yet but felt 84" was too short. I hear the 87" minn kota are fine. I fished on a 24 mckee craft with a 96" and we got in 4ft waves and still fished with the head staying about a foot under water line. That made me happy with my decision with the 96" for my 2360. If we would have even had a 87" i believe we would have cut our day short. So I personally wanted to be safe than sorry
|
|