|
Post by ndb8fxe on Mar 25, 2024 12:22:44 GMT -5
I have a low voltage issue with my main bilge pump. The switched power lead is fine, but the constant power for the auto bilge does not have proper voltage. I would like to run new wire for all 3 wired going to the bilge pump.
Has anyone done this? Anyone with tips on where to get power from and the routing of the wires to the aft bilge?
Thank you,
|
|
|
Post by outtadblue on Mar 26, 2024 8:36:17 GMT -5
I did mine. I taped the new wires to the old wires and pulled towards the bilge. The constant wire is wired to a hot lug on the house battery switch. Hope this helps.
|
|