|
Post by abouttime2fish on Mar 30, 2024 18:27:03 GMT -5
It’s an 84” Rhodan mounted with a Shuttleslide 7EXD w/8” extension. Boat is a 2006 2360CC. Set the beer down until later. With the motor fully stored, pop up bow light is useable and visable. Access to cleat in any position. To open anchor locker, shuttle slide must be slid forward, don’t have to actually deploy the trolling motor, just slide out of the way. Anchor locker lid clearance…. One, maybe two mm … yeah it’s real tight.
|
|
|
Post by abouttime2fish on Mar 30, 2024 18:32:56 GMT -5
Yes I made a backing plate from 1/8” aluminum.
Still need to instal the support but it’ll need a little modification to fit how I want.
Hoping I can swap the power cord that goes to plug and the curly power cord that goes to head so power is out left… for another day.
Me and my 15yo .. five hours for the physical instal.
I’m not sure how many beers for this one, I’m just getting started…..
|
|
|
Post by abouttime2fish on Mar 30, 2024 18:34:57 GMT -5
Oh, and I think a 96” would be an issue trying to get the head inside the gunnel.
|
|
|
Post by fishnfool on Mar 30, 2024 19:42:04 GMT -5
Alright, nice work!
Next up, test run!
|
|
|
Post by abouttime2fish on Apr 1, 2024 7:20:11 GMT -5
Still missing the battery…. If their original projection is correct another week or two.
|
|