|
Post by abouttime2fish on May 4, 2019 8:30:20 GMT -5
I think I have the old saltwater series stainless props. They are only marked with 20M and 20ML, at least without pulling them that’s all that’s on them.
So the question is this. They are ventilated props with the holes, but I can’t seem to find any plugs for them to try playing with that adjustment. Is that only a Merc prop thing?
And for those of you still fighting the ventilation issues (2360CC with twin 150’s) recommend reading about the Lenco auto glide system and how it manipulated the tabs. Admittedly I had a 65qt yeti full of bait and ice mounted up on the seat all the way forward, but full down tabs it will operate through that ventilation rpm zone no problem. I’m still looking for some used 17p 4 bladed props to try out though...
|
|
|
Post by kbh on May 4, 2019 9:20:00 GMT -5
The M series is the Reliance Series props. They are a little smaller in blade size than the Salt Water Series. What confuses me is I've never seen reliance props with vent holes.
|
|
|
Post by abouttime2fish on May 4, 2019 12:35:10 GMT -5
I think it may actually be a performance 3 prop as I look at pics online.
|
|
|
Post by Team Ruby on May 4, 2019 18:37:06 GMT -5
Is it a Merc prop? I see some plugs for Mercs are listed on ebay.
|
|
|
Post by abouttime2fish on May 4, 2019 20:05:00 GMT -5
No it’s a Yamaha prop.
|
|
|
Post by ragtop409 on May 6, 2019 20:33:02 GMT -5
Somebody could have just drilled a set of Yamaha? I so it done to a few old merc props when I had my scarab. Rag’s
|
|