|
Post by kbh on Dec 8, 2018 11:23:08 GMT -5
Here's another cheap and easy repair/upgrade for your old leaking T-top canvas. I got tired of water dripping on me and was about to go ahead and replace the T-top canvas. I had just repainted my white tile roof and had some leftover Lanco Siliconized roof paint and decided to give it a try on the canvas. It has worked better than I could have imagined and I'm now going on two years with no problem. I'll probably go ahead and put another coat on soon. No leaks and of course the bottom still looks like new. Attachment DeletedAttachment Deleted
|
|
|
Post by outtadblue on Dec 8, 2018 12:27:08 GMT -5
Dang that looks good.
|
|
|
Post by finatic on Dec 8, 2018 18:14:18 GMT -5
Just to say it again if anyone missed the other post. Were looking for all your projects under $500. Show them all. Good luck.
|
|
|
Post by daves236 on Dec 8, 2018 21:35:12 GMT -5
Here’s one of mine from early sept 18, adding a less than 200$ port light to one of the 2 flat areas of center console.
|
|
|
Post by daves236 on Dec 8, 2018 21:37:19 GMT -5
Your number 006...006...006
|
|
|
Post by jski59 on Dec 9, 2018 10:04:57 GMT -5
My 2860 had an igloo cooler seat in front of the console...cushion was nice, but the cooler was broken. The cushion had an overhang built in so it would fit over the top of the igloo. So I pulled all the staples, cut off the overhang strips from the cushion base, then stretched and re-stapled the vinyl so it was flat.
Mounted it to the top of an RTIC 65...it fit almost perfect, just a little overhang on the sides. Of course I never took a pic of the final install! your number 007
|
|
|
Post by kbh on Dec 9, 2018 10:18:42 GMT -5
My 2860 had an igloo cooler seat in front of the console...cushion was nice, but the cooler was broken. The cushion had an overhang built in so it would fit over the top of the igloo. So I pulled all the staples, cut off the overhang strips from the cushion base, then stretched and re-stapled the vinyl so it was flat. Mounted it to the top of an RTIC 65...it fit almost perfect, just a little overhang on the sides. Of course I never took a pic of the final install! Id love to see a picture of the finished product as I'm starting to get rips in my front seat cushion. I've been thinking about just getting some matching white vinyl and removing the seat and just re-covering it as is.
|
|
|
Post by finatic on Dec 9, 2018 15:54:20 GMT -5
Looking good guys, I think by Xmass were going to have many more,,, very nice.
|
|
|
Post by popeye on Dec 9, 2018 18:24:51 GMT -5
|
|
|
Post by kbh on Dec 9, 2018 21:06:52 GMT -5
Looking good guys, I think by Xmass were going to have many more,,, very nice. I've still got a few more to go. i like to fiddle with boats.
|
|
|
Post by mikey111k on Dec 10, 2018 9:00:08 GMT -5
|
|
|
Post by mikey111k on Dec 10, 2018 9:04:03 GMT -5
|
|
|
Post by mikey111k on Dec 10, 2018 9:07:04 GMT -5
Added a cubby in the bow between the fish boxes. Top portion is a shelf with 2 cup holders underneath. Attachment Deleted
|
|
|
Post by mikey111k on Dec 10, 2018 9:11:32 GMT -5
Had a couple 0* rod holders left so i added them in the bow. These are handy for a quick place to put rods while clearing lines. I positioned the aft one to be at the seam where the cushions meet. So for sandbar days with the cushions on i can put an umbrella in it or a table. Its been really handy. Attachment Deleted
|
|
|
Post by outtadblue on Dec 10, 2018 9:26:29 GMT -5
You da man! These look awesome as I have seen them in person. Great job!!!
|
|